1. The pneumatic automatic feeding and folding device is for T-shirt sleeve hemming, which can save manpower and upgrade technique.
2.Customers can adjust the width of hemming folding edge and the horizontal width between folding fabric and left needle as required. Since there is no need to cut the fabric in advance material cost can be saved.
3.The electric eye can detect feeding, edging and presser foot lifter automatically. After finishing the action, the operation will stop automatically.
4.The maximum productivity: 6000 – 7000 pc (cuff)/ 8 hours.
Suitable for the bottom hemming of T-shirt, underwear, cuff of children’s garment,etc… Able to adjust the width of hemming set to meet different demands, easy operation.
Available Model:
F007K-W121, F007KD-W121
F007K-W122, F007KD-W122
F007K-W123, F007KD-W123
F007K-W162, F007KD-W162
Back and forth moving feed dog is designed by patent and improved mechanism. The effective feeding stroke is bigger, and fabric feeding is more stable. >
Suitable for the bottom hemming of T-shirt, underwear, cuff of children’s garment,etc… Able to adjust the width of hemming set to meet different demands, easy operation.
Available Model:
F007K-W121, F007KD-W121
F007K-W122, F007KD-W122
F007K-W123, F007KD-W123
F007K-W162, F007KD-W162
This is a 3 needles 3 loopers machine, and special for seaming the shell fabric and lining of pocket in trousers or work pants in simple operation to increase sewing quality and efficiency.
This is a 3 needles 3 loopers machine, and special for seaming the shell fabric and lining of pocket in trousers or working pants in simple operation to increase sewing quality and efficiency.
Differential ratio of left and right feed dog can be adjusted separately for lap seaming to ensure symmertrical length to both left and right fabric. Applicable to trousers, casual pants and jeans, etc…
Differential ratio of left and right feed dog can be adjusted separately for lap seaming to ensure symmetrical length to both left and right fabric. Applicable to trousers, casual pants and jean, etc…
This machine is specially for tape binding on cross seaming of men’s briefs or sportswear to strengthen plain seam and for ornamental purpose.This machine is specially for tape binding on cross seaming of men’s briefs or sportswears to strengthen plain seam and for ornamental purpose. U 7 1 2 : finished tape width 10mm U712A : finished tape width 12mm
Mass production for belt loop by using stripped tape.
1. Normal W122 type can be changed to FBP type with FBP-256 or FBP-264 for belt loop sewing.
2. Different size binders and needles may be required depend on different fabric. Please refer to the below table and remark when ordering.
To sew a decorative convex stripe on sportswear, jeans or other clothes, can also add extra stripe inside convex to increase the effects of convexity and decoration.
To sew a decorative convex stripe on sportswear, jeans or other clothes, can also add extra stripe inside convex to increase the effects of convexity and decoration.
FINE TAPE BINDING (RIGHT TRIMMER MODEL WITH SMALL BINDER)
This machine is applicable for fine tape binding of women’s underwear or T-string. Before tape binding, the fabric edge is trimmed by the right trimmer. This solves the problem of bad binding, which the tape is not sewn on the fabric.The below tape feeding devices are applicable
SMK: Electric metering type tape feeding SMK1-E-01 with the control box and synchronizer, applicable to clutch motor, SMK1-E-02 equipped the direct drive servo motor for control integration. STC:Tension sensor type tape feeding STC1-S-01 with the control box and synchronizer, applicable to clutch motor, STC1-S-02 equipped the direct drive servo motor for control integration.
Top feeding devices ensure even length and tension controlled by electric digital controller, for elastic or lace attaching smoothly and properly on women’s underwears.
FFC: Mechanic type tape feeding. FE: Simple electric type tape feeding. SMK: Electric metering type tape feeding SMK1-C-01 with the control box and synchronizer, applicable to clutch motor, SMK1-C-02 equipped the direct drive servo motor for control integration. STC: Tension sensor type tape feeding STC1-U-01 with the control box and synchronizer, applicable to clutch motor, STC1-U-02 equipped the direct drive servo motor for control integration.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
